Huth End Finishing Swager
All Huth tooling is machined to specific tolerances from solid steel. After it is machined, it is gas-carburized and oil quenched to a minimum hardness of 58 Rockwell “C” scale. We do not use cast iron for any of our tooling. All Huth tooling is available from shelf stock. However, Huth will manufacture custom tooling to your specification for sizes not listed in this schedule.
Contact Us for Details >
Clamp Collets (All Models After Jan '85)
| No. | Imperial Size |
|---|---|
| 1775 | 3/4″ EMT |
| 1709 | 1″ EMT |
| 1710 | 1″ |
| 1718 | 11⁄8“ |
| 1714 | 11⁄4“ |
| 1756 | 15⁄16“ |
| 1738 | 13⁄8“ |
| 1712 | 11⁄2“ |
| 1758 | 15⁄8“ |
| 1734 | 13⁄4“ |
| 1778 | 17⁄8“ |
| 1720 | 2″ |
| 1720DF | 2″ Double Flare (Use with Part #518) |
| 1728 | 21⁄8“ |
| 1725 | 21⁄4“ |
| 1723 | 23⁄8“ |
| 1750 | 21⁄2“ |
| 1729 | 23⁄4“* |
| 1731 | 27⁄8“* |
| 1730 | 3″* |
| *Requires 892 Collet Holder
For Clamp Collets Prior To 1985 See Replacement Parts – Vintage |
|
| No. | Metric Size |
|---|---|
| 1740 | 40mm |
| 1742 | 42mm |
| 1745 | 45mm |
| 1700 | 48mm |
| 1705 | 50mm |
| 1728 | 54mm*** |
| 1755 | 55mm |
| 1760 | 60mm |
| ***21⁄8” = 54mm | |
Huth Swage Dies
| No. | Imperial Size |
|---|---|
| 110 | 1″ |
| 118 | 11⁄8“ |
| 114 | 11⁄4“ |
| 138 | 13⁄8“ |
| 112 | 11⁄2“ |
| 158 | 15⁄8“ |
| 134 | 13⁄4“ |
| 178 | 17⁄8“ |
| 120 | 2″ |
| 128 | 21⁄8“ |
| 125 | 21⁄4“ |
| 123 | 23⁄8“ |
| 150 | 21⁄2“ |
| 129 | 23⁄4“ |
| 130 | 3″ |
| No. | Metric Size |
|---|---|
| 140 | 40mm |
| 142 | 42mm |
| 145 | 45mm |
| 148 | 48mm |
| 149 | 50mm |
| 128 | 54mm*** |
| 155 | 55mm |
| 160 | 60mm |
| ***21⁄8“=54mm | |
Huth Reducing Dies
*Reducing Dies Require Clamp Collet 890, 891, or 892.
| No. | Imperial Size* |
|---|---|
| 775 | For 3/4″ EMT .799 OD |
| 779 | For 1″ EMT 1.024 OD |
| 780 | 2″ to 13⁄4“ |
| 781 | 21⁄4” to 2″ |
| 782 | 21⁄2” to 21⁄4“ |
| 783 | 3″ to 21⁄2“ |
| 784 | 2″ to 17⁄8“ |
| 785 | 13⁄4” to 15⁄8 “ |
| 786 | 15⁄8 ” to 11⁄2 “ |
| 787 | 11⁄2” to 13⁄8“ |
| 788 | 13⁄8” to 11⁄4 “ |
| 789 | 11⁄4” to 11⁄ 8 “ |
| 790 | 3″ to 23⁄4 “ |
| No. | Metric Size* |
|---|---|
| 760 | (50mm to 45mm OD) |
| 761 | (55mm to 50mm OD) |
| 762 | (65mm to 60mm OD) |
Ball Joint Tools - Female
| No. | Size |
|---|---|
| 555 | 13⁄4” , 17⁄8“, 2” (Female) |
| 556 | 21⁄4” to 21⁄2” (Female) |
| 564 | 23⁄4” to 3″ (Female) |
Ball Joint Tools - Male
| No. | Size |
|---|---|
| 550 | 13⁄4” (Male) |
| 551 | 17⁄8” (Male) |
| 552 | 2″ (Male) |
| 553 | 21⁄4” (Male) |
| 554 | 21⁄2” (Male) |
| 557 | 13⁄4” to 21⁄2” (Domer) |
| 558 | 25⁄8” to 23⁄4” (Domer) |
Flaring/Flanging Tools
Flaring/Flanging Tools Specs
| No. | Size |
|---|---|
| 518 | Flare Tool – 2″ Double Flare and 11⁄2” Flat Flare* |
| 519 | Flare Tool – 13⁄4” and 15⁄8” Double Flat Flare* |
| 853 | Pipe Flanger 11⁄2” to 3″ – (Replaces Pipe Flangers 848, 849, 850, 851) |
| *NOT SHOWN | |
Swager Tools
| No. | |
|---|---|
| 832 | Double End Cylinder Stop- Used to control cylinder stroke |
Header Collector Tool
| No. | Size |
|---|---|
| 101 | 3″ |
| 102 | 31⁄2“ |