Swager Tooling for BendPak® Machines
Huth has made swager tooling for BendPak® machines for a long time… since their customers insisted on it! Huth tooling is machined in America to specific tolerances from solid steel. After it is machined, it is gas-carburized and oil quenched to a minimum hardness of 58 Rockwell “C” scale. All Huth tooling is readily available from shelf stock. However, Huth will manufacture custom tooling to your specification for sizes not listed in this schedule.
BendPak® is a registered trademark of BendPak, Inc
Contact Us for Details >
PKDS-823 AND PKDF-818
Allows you to utilize Huth Swage Tooling directly on to your BendPak® machine.
BendPak® is a registered trademark of BendPak
| No. | Product Description |
|---|---|
| PKDS-823 | Quick Disconnect-Male, Huth Swage Tooling Adapter |
| PKDF-818 | Female Quick Disconnect For BendPak® benders |
Swage Die
Huth Swage die shown with with the PKDS-823
Requires the PKDS-823 Adapter
| No. | Imperial Size ID |
|---|---|
| 110 | 1″ |
| 118 | 11⁄8“ |
| 114 | 11⁄4“ |
| 138 | 13⁄8“ |
| 112 | 11⁄2“ |
| 158 | 15⁄8“ |
| 134 | 13⁄4“ |
| 178 | 17⁄8“ |
| 120 | 2″ |
| 128 | 21⁄8“ |
| 125 | 21⁄4“ |
| 123 | 23⁄8“ |
| 150 | 21⁄2“ |
| 129 | 23⁄4“ |
| 130 | 3″ |
Reducing Dies
Requires the PKDS-823 adapter
| No. | Imperial Size- ID* |
|---|---|
| 775 | For 3/4″ EMT .799 OD |
| 779 | For 1″ EMT 1.024 OD |
| 780 | 2″ to 13⁄4“ |
| 781 | 21⁄4” to 2″ |
| 782 | 21⁄2” to 21⁄4“ |
| 783 | 3″ to 21⁄2“ |
| 784 | 2″ to 17⁄8“ |
| 785 | 13⁄4” to 15⁄8 “ |
| 786 | 15⁄8 ” to 11⁄2 “ |
| 787 | 11⁄2” to 13⁄8“ |
| 788 | 13⁄8” to 11⁄4 “ |
| 789 | 11⁄4” to 11⁄ 8 “ |
| 790 | 3″ to 23⁄4 “ |
Ball Joint Tools - Female
| No. | Size |
|---|---|
| 555 | 13⁄4" , 17⁄8", 2" (Female) |
| 556 | 21⁄4" to 21⁄2" (Female) |
| 564 | 23⁄4" to 3" (Female) |
Ball Joint Tools - Male
| No. | Size |
|---|---|
| 550 | 13⁄4” (Male) |
| 551 | 17⁄8” (Male) |
| 552 | 2″ (Male) |
| 553 | 21⁄4” (Male) |
| 554 | 21⁄2” (Male) |
| 557 | 13⁄4” to 21⁄2” (Domer) |
| 558 | 25⁄8” to 23⁄4” (Domer) |
Flaring/Flanging
| No. | Size |
|---|---|
| 853 | Pipe Flanger 11⁄2” to 3″ – (Replaces Pipe Flangers 848, 849, 850, 851) |
Header Collector Tool
Requires the PKDS-823 Adapter
| No. | Size |
|---|---|
| 101 | 3″ |
| 102 | 31⁄2“ |