Huth Bending Dies & Shoes
All Huth tooling is machined to specific tolerances from solid steel. After it is machined, it is gas-carburized and oil quenched to a minimum hardness of 58 Rockwell “C” scale. We do not use cast iron for any of our tooling. All Huth tooling is available from shelf stock. However, Huth will manufacture custom tooling to your specification for sizes not listed in this schedule.
Full 5" Radius Dies
| No. | Size |
|---|---|
| 5812 | 11⁄2“ |
| 5820 | 2″ |
| 5824 | 21⁄4” ** |
| 5825 | 21⁄2” ** |
| **4” Thick | |
Full 4" Radius Dies
| No. | Size |
|---|---|
| 4858 | 15⁄8“ |
| 4820 | 2″ |
5" Radius Dies
| No. | Imperial Size |
|---|---|
| 5034 | 3⁄4“ |
| 5100 | 1″ |
| 5105 | 1.050″ |
| 5118 | 11⁄8“ |
| 5114 | 11⁄4“ |
| 5116 | 1.163″ |
| 5056 | 15⁄16“ |
| 5138 | 13⁄8“ |
| 5112 | 11⁄2“ |
| 5158 | 15⁄8“ |
| 5134 | 13⁄4“ |
| 5178 | 17⁄8“ |
| 5200 | 2″ |
| 5218 | 21⁄8“*** |
| 5414 | 21⁄4“** |
| 5438 | 23⁄8“** |
| 5412 | 21⁄2“** |
| 5534 | 23⁄4“** |
| 5578 | 27⁄8“** |
| 5530 | 3″** |
| **4″ Thick | |
| No. | Metric Size |
|---|---|
| 5040 | 40mm |
| 5042 | 42mm |
| 5045 | 45mm |
| 5048 | 48mm |
| 5050 | 50mm |
| 5218 | 54mm*** |
| 5055 | 55mm |
| 5060 | 60mm |
| *** 21⁄8” = 54mm | |
4" Radius Dies
| No. | Imperial Size |
|---|---|
| 4012 | 1⁄2“ |
| 4058 | 5⁄8“ |
| 4034 | 3⁄4“ |
| 4084 | 0.840″ |
| 4078 | 7⁄8“ |
| 4100 | 1″ |
| 4105 | 1.050″ |
| 4118 | 11⁄8“ |
| 4116 | 1.163″ |
| 4114 | 11⁄4“ |
| 4056 | 15⁄16“ |
| 4138 | 13⁄8“ |
| 4112 | 11⁄2“ |
| 4158 | 15⁄8“ |
| 4134 | 13⁄4“ |
| 4178 | 17⁄8“ |
| 4200 | 2″ |
| 4218 | 21⁄8“*** |
| 4414 | 21⁄4“** |
| 4438 | 23⁄8“** |
| 4409 | 21⁄2“** |
| **4″ Thick | |
| No. | Metric Size |
|---|---|
| 4040 | 40mm |
| 4042 | 42mm |
| 4045 | 45mm |
| 4048 | 48mm |
| 4050 | 50mm |
| 4218 | 54mm*** |
| 4055 | 55mm |
| 4060 | 60mm |
| ***21⁄8 = 54mm | |
3 1/2" Radius Dies
| No. | Imperial Size |
|---|---|
| 3012 | 1⁄2“ |
| 3058 | 5⁄8“ |
| 3034 | 3⁄4“ |
| 3084 | 0.840″ |
| 3078 | 7⁄8“ |
| 3092 | 0.922″ |
| 3100 | 1″ |
| 3105 | 1.050″ |
| 3118 | 11⁄8“ |
| 3116 | 1.163″ |
| 3114 | 11⁄4“ |
| 3056 | 15⁄16“ |
| 3138 | 13⁄8“ |
| 3112 | 11⁄2“ |
| 3158 | 15⁄8“ |
| 3134 | 13⁄4“ |
| 3178 | 17⁄8“ |
| 3200 | 2″ |
| 3218 | 21⁄8“*** |
| 3414 | 21⁄4“** |
| 3438 | 23⁄8“** |
| **4″ Thick | |
| No. | Metric Size |
|---|---|
| 3040 | 40mm |
| 3042 | 42mm |
| 3045 | 45mm |
| 3048 | 48mm |
| 3050 | 50mm |
| 3218 | 54mm*** |
| 3055 | 55mm |
| ***21⁄8 = 54mm | |
Controlled Wrinkle Dies
| No. | Description | Model |
|---|---|---|
| 3112W | 3″ RADIUS DIE, 1 1/2″ | ALL |
| 4112W | 4″ RADIUS DIE, 1 1/2″ | ALL |
| 5112W | 5″ RADIUS DIE, 1 1/2″ | ALL |
| 5158W | 5″ RADIUS DIE, 1 5/8″ | ALL |
| 3134W | 3″ RADIUS DIE, 1 3/4″ | ALL |
| 4134W | 4″ RADIUS DIE, 1 3/4″ | ALL |
| 5134W | 5″ RADIUS DIE, 1 3/4″ | ALL |
| 3200W | 3″ RADIUS DIE, 2″ | ALL |
| 4200W | 4″ RADIUS DIE, 2″ | ALL |
| 5200W | 5″ RADIUS DIE, 2″ | ALL |
| 4414W | 4″ RADIUS DIE, 2 1/4″ | ALL |
| 5414W | 5″ RADIUS DIE, 2 1/4″ | ALL |
| 4409W | 4″ RADIUS DIE, 2 1/2″ | ALL |
| 5412W | 5″ RADIUS DIE, 2 1/2″ | ALL |
| 5534W | 5″ RADIUS DIE, 2 3/4″ | ALL |
| 5578W | 5″ RADIUS DIE, 2 7/8″ | ALL |
| 5530W | 5″ RADIUS DIE, 3″ | ALL |
| 5531* | 5 1/2″ RADIUS DIE, 3″ | 2600 |
| *Used on 2600 Heavy Duty Bender Only – Call for information regarding additional sizes and wrinkle dies best suited for your Model | ||
| No. | Corresponding Back Shoe Size |
|---|---|
| 1112 | Back Shoe 1 1/2″ (2 Required)** |
| 1112 | Back Shoe 1 1/2″ (2 Required)** |
| 1112 | Back Shoe 1-1/2″ (2 Required)** |
| 1158 | Back Shoe 1 5/8″ (2 Required)** |
| 1134 | Back Shoe 1 3/4″ (2 Required)** |
| 1134 | Back Shoe 1 3/4″ (2 Required)** |
| 1134 | Back Shoe 1 3/4″ (2 Required)** |
| 1200 | Back Shoe 2″ (2 Required)** |
| 1200 | Back Shoe 2″ (2 Required)** |
| 1200 | Back Shoe 2″ (2 Required)** |
| 4211 | Back Shoe 2 1/4″ (2 Required)** |
| 4211 | Back Shoe 2 1/4″ (2 Required)** |
| 4412 | Back Shoe 2 1/2″ (2 Required)** |
| 4412 | Back Shoe 2 1/2″ (2 Required)** |
| 1234 | Back Shoe 2 3/4″ (2 Required)** |
| 1378 | Back Shoe 2 7/8″ (2 Required)** |
| 1350 | Back Shoe 3″ (2 Requried)** |
| 1350* | Back Shoe 3″ (2 Requried)** |
| *Used on 2600 Heavy Duty Bender Only **(4) #855 Pins Required |
|
Square Dies
| No. | Radius | Size |
|---|---|---|
| 3334 | 3″ | 3⁄4“ |
| 4334 | 4″ | 3⁄4“ |
| 3310 | 3″ | 1″ |
| 4310 | 4″ | 1″ |
| 4314 | 4″ | 11⁄4“ |
| 5314 | 5″ | 11⁄4“ |
| 5312 | 5″ | 11⁄2“ |
| 5320 | 5″ | 2″ |
| 5320 | 5″ | 2″ x 3″ Hard Way |
| 5322 | 5″ | 2″ x 3″ Easy Way |
| 5325 | 5″ | 21⁄4“ |
| 5350 | 5″ | 21⁄2“ |
| 5330** | 6″ | 3″
**3 inch bending requires a Heavy Duty Bender model with a 6 inch cylinder. 85,000 pounds of force. |
| Custom Sizes Available Upon Request. Send Us Your Material for a Sample of What Can Be Done | ||
| No. | Corresponding Back Shoe Size |
|---|---|
| 1000 | Back Shoe 3⁄4” to 11⁄2“ |
| 1000 | Back Shoe 3⁄4” to 11⁄2“ |
| 1000 | Back Shoe 3⁄4” to 11⁄2“ |
| 1000 | Back Shoe 3⁄4” to 11⁄2“ |
| 1000 | Back Shoe 3⁄4” to 11⁄2“ |
| 1000 | Back Shoe 3⁄4” to 11⁄2“ |
| 1000 | Back Shoe 3⁄4” to 11⁄2“ |
| 1020 | Back Shoe 2″ |
| 1021 | 2″ x 3″ Hard Way |
| 1022 | 2″ x 3″ Easy Way |
| 1025 | Back Shoe 21⁄4“ |
| 1054 | Back Shoe 21⁄2“ |
| 1030** | Back Shoe 3″
**3 inch bending requires a Heavy Duty Bender model with a 6 inch cylinder. 85,000 pounds of force. |
| All Square Back Shoes Include Required Pins or Bolts | |
Flat Stock Bending Dies
| No. | Radius | Size |
|---|---|---|
| 3303 | 31⁄2“ | Variable* |
| *See the Sell Sheet for examples or call (800) 558-7808 for additional size options |
||
| No. | Corresponding Back Shoe Size |
|---|---|
| 1003 | Flat Stock Back Shoe (855 Pins Included) |
Back Shoes (2 Required)
*(2) 855 Pins Required Each
| No. | Imperial Size* |
|---|---|
| 1012 | 1⁄2“ |
| 1058 | 5⁄8“ |
| 1034 | 3⁄4“ |
| 1840 | 0.840″ |
| 1078 | 7⁄8“ |
| 1092 | 0.922″ |
| 1100 | 1″ |
| 1105 | 1.050″ |
| 1118 | 11⁄8“ |
| 1116 | 1.163″ |
| 1114 | 11⁄4“ |
| 1256 | 15⁄16“ |
| 1138 | 13⁄8“ |
| 1112 | 11⁄2“ |
| 1158 | 15⁄8“ |
| 1134 | 13⁄4“ |
| 1178 | 17⁄8“ |
| 1200 | 2″ |
| 1021 | 2″ x 3″ Hard way |
| 1022 | 2″ x 3″ Easy way |
| 1218 | 21⁄8“*** |
| 4211 | 21⁄4“** |
| 4237 | 23⁄8“** |
| 4412 | 21⁄2“** |
| 1234 | 23⁄4“** |
| 1378 | 27⁄8“** |
| 1350 | 3″** |
| **4″ Thick | |
| No. | Metric Size* |
|---|---|
| 1340 | 40mm |
| 1342 | 42mm |
| 1345 | 45mm |
| 1348 | 48mm |
| 1349 | 50mm |
| 1218 | 54mm*** |
| 1355 | 55mm |
| 1360 | 60mm |
| ***21⁄8 = 54mm | |
Half Shoes (1 Required)
*(1) 855 Pin Required
| No. | Imperial Sizes* |
|---|---|
| 1027 | 1/2″ |
| 1029 | 5/8″ |
| 1035 | 3/4″ |
| 1031 | 7/8″ |
| 1037 | 1″ |
| 1033 | 11⁄8“ |
| 1039 | 11⁄4“ |
| 1356 | 15⁄16“ |
| 1041 | 13⁄8“ |
| 1038 | 11⁄2“ |
| 1042 | 15⁄8“ |
| 1040 | 13⁄4“ |
| 1043 | 17⁄8“ |
| 1045 | 2″ |
| 1051 | 21⁄8“*** |
| 4416 | 21⁄4“** |
| 4437 | 23⁄8“** |
| 4410 | 21⁄2“** |
| 1236 | 23⁄4“** |
| 1352 | 3″** |
| **4″ Thick
***21⁄8 = 54mm |
|
| No. | Metric Sizes* |
|---|---|
| 1405 | 40mm |
| 1425 | 42mm |
| 1455 | 45mm |
| 1448 | 48mm |
| 1450 | 50mm |
| 1051 | 54mm*** |
| 1445 | 55mm |
| 1460 | 60mm |
| ***21⁄8 = 54mm | |
Three-Quarter Shoes (1 Required)
*(1) 855 Pin Required
| No. | Imperial Size* |
|---|---|
| 1036 | 13⁄4“ |
| 1044 | 17⁄8“ |
| 1046 | 2″ |
| 1063 | 21⁄8“*** |
| 4413 | 21⁄4“** |
| 4415 | 21⁄2“** |
| 1235 | 23⁄4“** |
| 1351 | 3″** |
| **4″ Thick
***21⁄8 = 54mm |
|
| No. | Metric Sizes* |
|---|---|
| 1405 | 40mm |
| 1425 | 42mm |
| 1455 | 45mm |
| 1448 | 48mm |
| 1450 | 50mm |
| 1051 | 54mm*** |
| 1445 | 55mm |
| 1460 | 60mm |
| ***21⁄8 = 54mm | |
Quarter Shoes (1 Required)
*(1) 855 Pin Required
| No. | Size* |
|---|---|
| 1081 | 15⁄8“ |