Huth has combined the tooling you’ll be reaching for most often into comprehensive, convenient tooling packages. Our Die Packages combine the tooling for bending and end-finishing with the accessories you need to get the most from your bender. Huth will custom manufacture tooling to your specifications.
074 Die Package Tooling - Use with 1674 Expander Only
Arbor and Segments
No.
TYPE
Size
574*
Arbor
27⁄8” to 6″
572
Arbor
13⁄8” to 13⁄4” (Solid Piece)
573
Arbor
13⁄4” to 4″ (Solid Piece)
481
Segment
27⁄8” to 31⁄2“
472
Segment
11⁄2” to 13⁄4” (Solid Surface)
474
Segment
13⁄4” to 21⁄8“
475
Segment
21⁄8” to 21⁄2“
476
Segment
21⁄2” to 3″ Ring Assortment
482
Segment
33⁄8” to 4″
483
Segment
37⁄8” to 41⁄2“
484
Segment
43⁄8” to 5″
485
Segment
47⁄8” to 51⁄2“
486
Segment
53⁄8” to 6″
*All sizes are ID
1992 3" Tooling Package
For use on benders with 700 Series or 1700 Series Collets with a clamp style collet holder. (Standard on all Huth Bender models from September 1981 to present.)
No.
Product Description
5530
Radius Die – 3″
1350
Back Shoe (2) – 3″
1351
Three-Quarter Shoe- 3″
1352
Half Shoe -3″
855
Die Pins (6)
892
Collet Holder – 3″
1730
Collet
853
Flaring/Flanging Tool 1½” to 3½”
783
Reducer (3” to 2½”)
130
Swage Die – 3″
476*
Segment Set (2½” ID to 3” ID)
*Requires Arbor 508 and Arbor Tip 499 (or) Arbor 573
1993 3" Tooling Package
For use on benders with 200 series collets with either a cam action or spin close style holder. (Standard on all Huth Bender models from 1955 to September 1981)
No.
Product Description
5530
Radius Die – 3″
1350
Back Shoe (2) – 3″
1351
Three-Quarter Shoe – 3″
1352
Half Shoe – 3″
855
Die Pins (6)
508
Arbor 11⁄2″ to 4″
499
Arbor Tip 1¾” to 4″
476
Segment Set (2 1⁄2″ ID to 3″ ID)
1995 2-3/4" Tooling Package
For use on benders with 700 Series or 1700 Series Collets with a clamp style collet holder. (Standard on all Huth Bender models from September 1981 to present.)
No.
Product Description
5534
5″ Radius Die – 2¾”
1234
Back Shoe (2) – 2¾”
1235
Three-Quarter Shoe – 2¾”
1236
Half Shoe – 2¾”
855
Die Pins (6)
1729 *
Collet – 2¾”
790
Reducer (3″ to 2¾”)
129
Swage Die – 2¾”
*Requires 892 Collet Holder
1996 3" Short Tooling Package
No.
Product Description
5530
5″ Radius Die – 3″
1350
Back Shoe (2) – 3″
855
Die Pins (4)
Choice of one of the following:
1351
Three-Quarter Shoe with Pin
1352
Half Shoe with Pin
476 *
Segment Set (2½” ID to 3″ ID)
*Requires Arbor 508 and Arbor Tip 499 (or) Arbor 573
1997 2-3/4" Short Tooling Package
No.
Product Description
5534
5″ Radius Die – 2¾”
1234
Back Shoe (2) – 2¾”
855
Die Pins (4)
Choice of one of the following:
1235
Three-Quarter Shoe with Pin
1236
Half Shoe with Pin
476*
Segment Set (2½” ID to 3″ ID)
*Requires Arbor 508 and Arbor Tip 499 (or) Arbor 573
1988 3" End Finishing Package
Designed for benders which utilize 700 or 1700 series collets to perform 3″ swaging.
